2N IP series Automation Manual

2N TELEKOMUNIKACE a.s., www.2n.cz 61/104
StopMulticastRecv
The block defines the stopping action for audio stream receiving to StopMulticastRecv
a multicast IP address.
Parameters
– define the event to launch this action.Event
– define the condition to be met for the action to be executed. This Condition
parameter is optional.
– define the channel number (0–3) to be controlled.Channel
Example
Stop audio stream receiving via channel 1 if the event defined on row 2 arises:

2N IP series Specifications

General

Category	Intercom System
Network Interface	10/100 Mbps Ethernet
Connectivity	Ethernet
Integration	SIP
Ingress Protection	IP54
Operating Voltage	12V DC
Audio Codec	G.711
Supported Protocols	SIP, RTSP, HTTP, HTTPS
Supported Languages	Multiple