2N IP series User Manual

Configuration manual for 2N IP intercoms
249 / 282
•
•
NTP Server Address – set the IP address/domain name of the NTP server used for your
intercom time synchronization. The server IP address and domain name cannot be set if
Use time from Internet is disabled.
NTP Time Status–display the state of the last local time synchronization attempt via the
NTP server (Not Synchronized, Synchronized, Error).

2N IP series Specifications

General

Category	Intercom System
Network Interface	10/100 Mbps Ethernet
Connectivity	Ethernet
Integration	SIP
Ingress Protection	IP54
Operating Voltage	12V DC
Audio Codec	G.711
Supported Protocols	SIP, RTSP, HTTP, HTTPS
Supported Languages	Multiple