Configuration manual for 2N IP intercoms
1. Product Overview
The 2N IP intercoms can smartly replace traditional doorbell push-button speakerphone panels
and all wiring, bells and home intercom installations in buildings with structured cabling. The
intercoms provide more advanced and wider services than standard home phones. The
installation is very easy, all you need is connect the intercom to the other LAN elements using a
UTP cable and set necessary parameters.
Thanks to the integrated SIP protocol, the intercom can make use of all VoIP services: call
forwarding at absence (to another office, VoiceMail or a cellular phone) or call transfer (from the
secretary’s office to the required person, e.g.).
The intercoms are equipped with a programmable number of quick dial buttons for speed
calling to the users whose numbers are included in the intercom Users list. Each of the quick dial
buttons can be assigned up to three phone numbers, which can be dialled in parallel or
sequentially. Thanks to an integrated time sheet it is possible to configure each of the buttons in
such a way that the called party is always accessible and/or calls to selected phone numbers can
be barred off the working hours.
Some2N IP intercom models are equipped with a numeric keypad, which can be used as a code
lock or a standard push-button phone.
The 2N IP intercoms help LAN users scan the area in front of the camera via video streaming.
Thanks to the full ONVIF support, the intercoms can become part of the Video Surveillance
System in your facility.
The 2N IP intercoms can be equipped with an RFID card reader for authorised access control
and thus become a key part of your surveillance or attendance control systems.
The 2N IP intercom is equipped with a relay switch (and, optionally, other relays and outputs),
which controls the electric lock or other equipment connected to the intercom. Its activation
time and method can be programmed flexibly: it can be activated by a code, automatically by a
call, by pressing a button, and so on.It is always recommended that the 2N
®
Security Relay (Part
No. 9159010) is used for increased security.
To Next Page
Loading...
Need help?
General
