Configuration manual for 2N IP intercoms
•
•
•
•
•
5.2.2 Time Profiles
Such intercom functions as outgoing calls and RFID card/numeric code access, for example, can
be time-limited by being assigned atime profile. By assigning a time profile you can:
block all calls to a selected user beyond the set time interval
block calls to selected phone numbersbeyond the set time interval
block RFID access for a userbeyond the set time interval
block numeric code access for a userbeyond the set time interval
block switch activation beyond the set time interval
Assign a time profile according to a week time sheet to define availability of the selected
function. Just set from-to or days in the week on which the function shall be available.2N
IPintercom helps you create up to 20 time profiles (depending on the2N IPintercom model)
that can be assigned to the function; refer to the Users, Access Cards and Switches settings.
The time profiles are defined not only using the week time sheet but also manually with the aid
of special activation/deactivation codes that you can assign to them after arriving in/before
leaving your office, for example. Enter the activation/deactivation codes using the numeric
keypad of your intercom or phone (during the intercom call). Refer to theDirectory/Time
Profilesmenu for the time profile settings.
To Next Page
Loading...
Need help?
General
