Configuration manual for 2N IP intercoms
Beta Function Name Description
Password-Protected Configuration
File
This function helps you encrypt the configuration file
with a password during backup (refer to 5.5.7
Maintenance). To upload the configuration file to the
device, you need to enter a security password. If the
password fails to match, the configuration file will not
be uploaded.
Multifactor Authentication of
License Plates
Once this function is activated, the Multifactor selection
appears in Services > Access Control > Arrival Rules >
Advanced Settings > License Plate Recognition. Access
is only granted when at least two authentication
methods are verified as set in the access rules. Once the
license plate is recognized, remember to enter another
authentication method within 60 seconds.
Noise Cancelling The function cancels ambient noise in the microphone
when voice is detected.
5.6.4 License
To Next Page
Loading...
Need help?
General
