2N IP series User Manual

Configuration manual for 2N IP intercoms
26 / 282
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Backlight– backlight intensity setting
Display–basic display settings
Card Reader–card reader, Wiegand interface settings
Digital Inputs–digitial input settings
Extenders–2N
®
IP Versoextender settings
Lift Control–floor lift access settings
System
Network–LAN connection settings, 802.1x, packet capturing
Date and Time–real time and time zone settings
Features – test function settings
License–license settings, trial license activation
Certificates–certificate and private key settings
Auto Provisioning –automatic firmware and configuration update settings
Syslog–syslog message sending settings
Maintenance–backup and configuration reset, firmware update
5.1 Status
5.2 Directory
5.3 Calling
5.4 Services
5.5 Hardware
5.6 System
5.7 Used Ports


2N IP series Specifications

General

Category	Intercom System
Network Interface	10/100 Mbps Ethernet
Connectivity	Ethernet
Integration	SIP
Ingress Protection	IP54
Operating Voltage	12V DC
Audio Codec	G.711
Supported Protocols	SIP, RTSP, HTTP, HTTPS
Supported Languages	Multiple