3D Histech Pannoramic DESK - Page 66

Pannoramic DESK 1.18.1 User’s Guide 5 Troubleshooting and Maintenance
Slide is often positioned incorrectly
• Guiding fault in transport system
• Contact 3DHISTECH Service for support.
Digitization process is extremely slow
• Extended focusing option is activated
• Deactivate the Extended focusing option if not required.
• Z-stack option is activated
• Deactivate the Z-stack option if not required.
Image is out of focus
• Focus range limit is activated
• Deactivate the Limiting focus range option.
• Focus range setting is incorrect
• Change focus range setting.
All individual images show a shading effect
• Algorithm failed to find empty image fields
• Capture a reference image with a blank slide (see section 4.2.2 Image
Compensation).
May 29, 2014 - Rev. 1 3DHISTECH Ltd.
66(77)