3D Systems, Inc.
47
REMOVING PRINT PLATFORM
• When Status screen message shows <job_name> Remove Print; open chamber door.
• Open the chamber door.
• Slide the latch release back to disengage the latch; lift platform from x-carriage.
<job_name> Remove
Print; open chamber door
Slide latch back
REMOVE PART FROM PRINT PLATFORM
• Place warm platform of parts in a freezer for a few minutes. As the parts and platform cool, they contract at different rates and
separate.
• Alternatively, the parts can be mechanically separated from the build platform by force using a tool such as a thin blade.
To Next Page