Model C960 Headset Intercom SystemReplacement Parts and Service
3-8
E 3M 2000 May
Replacing the Headset Speaker
Tools Required:
S Phillips screwdriver
S Razor blade
S Small, flat-blade screwdriver (jeweler’s type)
S Needlenose pliers
Procedure:
1. Remove the ear pad as shown in Figure 3-1.
2. Remove the headband and the battery. See
Figure 3-2.
3. Remove the outer case and and the two keypads
and set them aside. See Figure 3-2.
!
Caution
The headset PWA is not fastened to the inner case
assembly. Be careful not to strain the speaker
battery contact and microphone leads that are
connected to the PWA.
Figure 3-1.
To Next Page
Loading...
