52
3M
™
Pocket Projector MP220
© 2012 3M. All Rights Reserved.
Tip: Some video devices do not have the standard audio and video connections
and may require an AV cable specified by the manufacturer. The AV cable
allows you to connect your video device to your TV monitor or your projector
and may be purchased from the video device manufacturer. Once you have
the AV cable, use the cable adapters to connect the video device cable and the
projector cable.
Connecting to a Component Video Device (requires optional
accessory)
For component video input, you must purchase the optional 3M MP220 Component
AV Cable. This cable sends a higher quality video signal for the best possible image.
1 Connect the component AV cable to the projector’s VGA-AV input.
2 Connect the other end of the AV cable to the video device’s audio and video
outputs.
To Next Page
Loading...
Need help?
General
