4IPNET EAP737 - 2 Navigating the Web Management Interface

11
User Manual ENGLISH
EAP/OWL-Series Wave 2 Enterprise Access Point
Copyright © 2017, 4ipnet, Inc. All rights reserved. All other trademarks mentioned are the property of their respective owners.
2. Navigating the Web Management Interface
The APs have a web-based interface for configuration and management. This chapter will guide users
through the AP’s detailed settings. The following table shows all the function tabs under the Main Menu
of Web Management Interface (WMI) of the AP.
System
Wireless
Firewall
Utilities
Status
General
VAP Overview
Firewall List
Change Password
Overview
Network
Interface
General
Service
Backup & Restore
Interfaces
DHCP Server
VAP Config
Advanced
System Upgrade
Associated Clients
Management
Security
Reboot
DHCP Lease
CAPWAP
Repeater
Upload Certificate
Link Status
IPv6
Advanced
Background Scan
Event Log
iBeacon
Access Control
Discovery Utility
Wireless Log
RTLS
Hotspot 2.0
Network Utilities
Monitor
DPI DNS
 Note:
On each configuration page, you may click SAVE to save the changes of your configured
settings, but you must reboot the system for the changes to take effect. After clicking
SAVE, the following message will appear: “Some modification has been saved and will take
effect after Reboot.” All online users will be disconnected during reboot or restart.