User’s Manual
WHG Controller / HSG Gateway ENGLISH
this attribute carefully based on your network usage
IPv4 DSCP and 802.1p Mapping: This criteria enables the static mapping configuration from
IPv4 DSCP tag into the desired 802.1p traffic class for sending in the managed VLAN network.
IPv6 Traffic Class and 802.1p Mapping: This criteria enables the static mapping configuration
from IPv6 traffic tag into the desired 802.1p traffic class for sending in the managed VLAN
network.
Policy 1~x (model dependent) can be applied to specific group of users in different Service Zones.
Policy 1 has the highest priority, and Policies with the higher priority shall be the first applied Policy.
A Preferred DHCP Pool (defined in Service Zone DHCP configurations) may be selected here as well.
7) Blacklists
Blacklist profiles can be defined and each active authentication option may be configured with one of
these blacklist profiles. A user account listed on the blacklist is not allowed to log into the system, the
client's access will be denied. The administrator may select one blacklist from the drop-down menu and
this blacklist will be applied to this specific authentication option. Note that names on the Blacklists can
be configured to be case insensitive.
To Next Page
Loading...
