User’s Manual
WHG Controller / HSG Gateway ENGLISH
Static: Manually specifying the IP address of the WAN Port. The fields with
red asterisks are required to be filled in.
Dynamic: It is only applicable for a network environment where the DHCP
server is available on the upstream network. Click the Renew button to get
an IP address automatically.
PPPoE: If your ISP provides PPPoE Dialup connection, then the ISP will issue
you an account with a password. You would need to enter the account
credential in the WAN configuration page for dialing up to the ISP.
1. When in doubt, please consult your ISP provider regarding details of your
subscribed uplink service.
2. Please note that WAN load balancing and WAN failover features are only
available when WAN2 is configured.
To Next Page
Loading...
