Ping: It allows administrator to detect a device using IP address or Host domain name
to see if it is alive or not.
Trace Route: It allows administrator to recover the real path of packets from the
gateway to a destination using IP address or Host domain name.
ARPing: Allows the administrator to send ARP request for a specific IP address or
domain name.
ARP Table: It allows administrator to view the IP-to-Physical address translation tables
used by address resolution protocol (ARP).
Ping: It allows administrator to detect a device using IPv6 address or Host domain
name to see if it is alive or not.
Trace Route 6: It allows administrator to recover the real path of packets from the
gateway to a destination using IPv6 address or Host domain name.
Neighbor Discovery: The administrator can use this feature to learn about IPv6
Neighbor nodes that are on the same IP segment or domain name.
Neighbor Cache: a node that manages the information about its neighbors in the
Neighbor Cache. This feature allows the administrator to view the information stored
on system’s neighbor cache.
To Next Page
Loading...
