User’s Manual
WHG Controller / HSG Gateway ENGLISH
The system name. The default
name is the model number.
The present firmware version of
WHG CONTROLLER
Displays for how long the system
has operated.
The current build number.
The local time is shown as the
system time.
The network time server that the
system is set to align.
IP address of the preferred DNS
Server.
IP address of the alternate DNS
Server.
Enabled/disabled displays if the
system is currently using the proxy
server.
The preset URL upon users’ initial
successful login.
Warning of Internet
Disconnection
The minutes allowed for the users
to be inactive before their account
expires automatically.
The IP address and port number of
the external Syslog Server. N/A
means that it is not configured.
The IP address and port number of
the external Syslog Server. N/A
means that it is not configured.
The maximum number of days for
the system to retain the users’
information.
Receiver Email Address (es)
The email address to which the
traffic history or user’s traffic history
information will be sent.
Click “See Reports” for the following available reports, sorted by interface (available on WHG models,
HSG1250 and above): Network Traffic, CPU Load, CPU Temperature, Memory Usage, Storage Usage,
Online Users, Successful Logins, Sessions, DHCP Leases and DNS Queries. The reports can also be
customized to your preference by selecting the Time range and Interval. These reports can be sent via
email, syslog, or FTP.
To Next Page
