27
ECONOMY MODE SETTINGS
Table 12. Economy Mode Settings: Setpoint Adjustment Value
ACTION DISPLAY
From the Home Screen, press the Operational Button underneath
“MENU” to enter the Main Menu.
Notice how the text above the Operational Buttons on the display changes
as you navigate through the various menus and screens.
Use the Up/Down buttons to select (highlight in black) the Economy
Mode Setup menu from the Main Menu. Press the Operational Button
underneath “SELECT” to enter the Economy Mode Setup menu.
Use the Up/Down buttons to select (highlight in black) Setpoint
Adjustment. Press the Operational Button underneath “CHANGE” to
activate the adjustment mode for the Setpoint Adjustment value.
Use the Up/Down buttons to change the Setpoint Adjustment to the
desired value. The Setpoint Adjustment value is adjustable from 2°F
(1.1°C) to 50°F (27.8°C). The factory default is 20°F (11.0°C).
Notice how the text above the Operational Buttons on the display
changes to “UPDATE” & “CANCEL” when the adjustment mode is
activated and how the current value is outlined rather than highlighted
in black.
Press the Operational Button underneath “UPDATE” to enter and conrm
the new value. Pressing the Operational Button underneath “CANCEL”
would discard the new value and retain the previous value.
The new Setpoint Adjustment value should now be displayed as the
current value.
Printed on 5/6/2022 7:17 AM CT
To Next Page
Loading...
Need help?
General
