Personalizing your phone
Aastra 632d 105
eud-1586/1.0 – R3.0 – 04.2013
Function Description
Call Forwarding
With this function you forward incoming calls directly to a different destina-
tion. For further information refer to chapter "Forwarding calls (Call forward-
ing)", page 54.
Call forwarding if busy
With this function you forward incoming calls directly to a different destina-
tion if you are busy. For further information refer to chapter "Forwarding
calls (Call forwarding)", page 54.
Call Forwarding on No Reply
With this function you forward incoming calls you receive on your phone to
another destination. For further information refer to chapter "Forwarding a
Call on No Reply (CFNR)", page 55.
Switch group x
This function lets you route calls and functions via switch groups. Each
switch group has three switching positions. The default position is 1.
Control output
You can control external electric equipment or installations using control
outputs. For example you can use your phone to open and close electric
gates or to switch the lights on or off throughout a building.
Welcome announcement
Announcement service for incoming internal and external calls. If you do not
answer an external call after a set delay, the user who is calling will obtain an
announcement. After the announcement the caller will then hear the ring-
back tone again.
Protection
This function protects you against Call Waiting and Announcement. For fur-
ther information refer to chapter "Activating protection against call types",
page 96.
Remote maintenance
This function lets you set remote maintenance access to your phone on a
one-off basis of permanently.
MCID
This function lets you track and record a malicious call. For further informa-
tion refer to chapter "Tracking a malicious call", page 65.
Agent The call routing of calls in the queue can be controlled using an agent.
User group
In the user group incoming and internal calls are routed to a group of inter-
nal destinations according to a preconfigured call distribution.
Home alone
If calls to a user group can only be answered by one user, the user in question
can activate Home Alone on the user group. Then if the user is already in a
call, all subsequent internal or external calls to the user group obtain a busy
tone.
Free configurable
You can use function commands to define a function to suit your personal
requirements. A function can consist of one or more function commands,
function codes, and the phone number. You can either carry out a function
directly or store it under a key. For further information refer to chapter "For-
mulating functions", page 107.
CLIR
This function lets you prevent your call number from being displayed to the
caller. For further information refer to chapter "Suppressing your call num-
ber from your called party's terminal display", page 65.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
To Next Page
Loading...
