Dialling and phoning
Aastra 632d 27
eud-1586/1.0 – R3.0 – 04.2013
Using a headset
To make a phone call with the headset.
If you answer a call in headset mode using the Call key or Loudspeaker key, the call is
provided on the headset.
Note:
If you loose the radio contact with a Bluetooth headset, you can go back into the
radio area without being disconnected from the active connection.
Your phone is ringing. To answer the call, proceed as follows:
Press the Call key or Loudspeaker key.
➔The call is provided on your headset.
Press the Loudspeaker key.
➔The phone’s microphone is switched on and the headset microphone is
switched off.
Headset <--> Handset
You can use the Headset or Handset softkey to switch modes.
Ending a call:
Press the End key.
Notes:
• To find out how to activate the headset, refer to the chapter "To activate
headset mode", page 88.
• To find out how to connect a Bluetooth headset, refer to chapter "Activating
Bluetooth mode and Bluetooth devices", page 88.
• To call a user, select the user’s phone number and press the Call key or Loud-
speaker key.
• For more information refer to your headset’s user’s guide.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
To Next Page
Loading...
