Installation and first-time operation
126 Aastra 632d
eud-1586/1.0 – R3.0 – 04.2013
Connecting a cordless phone
Connecting the charging unit
Before connecting the charging unit, you must remove the two lateral guides in the
charging unit. They are easy to lift on the inside edge using a fingernail or a paper clip.
You can remove these plastic guides by pushing a suitable screwdriver into the slits
on the bottom of the charger.
1. Plug the cable connector into the socket on the underside of the charging unit.
2. Feed the cable through the strain relief provided.
3. Plug the plug-in power adapter into an available socket outlet.
Note:
The plug designs vary from country to country.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
To Next Page
Loading...
