Personalizing your phone
88 Aastra 632d
eud-1586/1.0 – R3.0 – 04.2013
Hands-free and headset settings
This section explains other ways in which you can make calls with your phone.
Connecting a headset
Connect your headset to the socket on the bottom left-hand side of your phone. The
headset mode is then automatically activated.
Your phone also has a Bluetooth interface (2.0) so you can operate the corresponding
headsets. Only audio data can be transmitted via the Bluetooth interface with a head-
set.
The opening of the headset connection is closed with a captive cover. If the headset is
not in use, please close the opening so the phone can be used in accordance with its
protection class.
Remove the cover by pulling it at the top edge of the housing. Never pull it at the bot-
tom edge!
To activate headset mode
You have connected a headset and now want to activate the headset mode.
A headset can be connected in parallel with the handset.
If you answer a call in headset mode using the Call key or Loudspeaker key, the call is
provided on the headset.
When you connect a Bluetooth headset (see chapter "Activating Bluetooth mode and
Bluetooth devices", page 88), the headset is automatically activated.
Activating Bluetooth mode and Bluetooth devices
You want to make and receive phone calls with a Bluetooth-supported headset.
You can activate Bluetooth devices as soon as you have activated the Bluetooth
mode.
You can activate or deactivate the Bluetooth manually.
Note:
To find out how to make phone calls with the headset, refer to the chapter "Using a
headset", page 27.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
To Next Page
Loading...
