6/1553-DBC 434 01 Uen C 2010-12-17 26
A
ASTRA 7434IP DESCRIPTION
2.10 Handsfree Mode
In handsfree mode, you do not lift the handset to start a procedure, and
instead of replacing the handset when you end a call, you press the
Clear softkey or .
By default, the phone is set to connect calls to the loudspeaker when you
answer incoming calls, or when you make calls by pressing a line key.
This default setting is known as the loudspeaker preset mode. When you
dial a number without lifting the handset, the call is also connected to the
loudspeaker by default.
2.11 Headset Mode
Using a headset allows you to make and receive calls without using the
handset.
Plug the headset cable to the connector marked , and the headset is
ready to use. If you are using a wireless headset, plug the radio base
cable to the connector marked .
Answer a call Press the line button that indicates an
incoming call (the button's indicator is
flashing) or press Answer.
Make a call Dial the number you want to call. When
someone answers, the speakerphone is
activated. Then you can pick up the
handset, or continue to use the
speakerphone.
Clear a call
Press the Clear softkey or .
Switch from handsfree
to handset
Lift the handset.
.
Switch from handset
to handsfree
Press and replace the handset.
Switch from handsfree
to headset
Press .
Switch from headset
to handsfree
Press .
To Next Page
Loading...
