6/1553-DBC 434 01 Uen C 2010-12-17 42
I
NCOMING CALLS
4.5 Answering a Second Incoming Call
You have three access lines ( , , ) for incoming and outgoing
calls. All lines have the same extension number. This feature is called
triple access line.
To answer a second incoming call, do the following:
1. You have an ongoing call on the key, and the key flashes
to indicate a new incoming call.
2. Press key to answer.
The first call is put on hold.
Note: To answer a second incoming call, you have to activate Free on
busy, see below. A call waiting call can be answered although
free on busy is not activated.
4.5.1 Activating Free on Busy
To activate Free on busy, do the following:
1. Press Presence.
2. Select Free on busy: OFF, and press Select.
3. Select ON put call through, and press Set.
A confirmation question is displayed.
4. Press Yes to confirm.
Note: If you have ongoing calls on line 1 and on line 2 and if there is a
new call received on line 3, you cannot transfer any of the calls to
a fourth part.
4.6 Parallel Ringing
Parallel ringing makes it possible for an incoming call to ring several
phones simultaneously and for the call to be answered on any of these
phones. The main advantage of this feature is that you do not risk losing
any calls.
The parallel ringing feature requires all phones involved to be defined in
a parallel ringing list, which is set up by the system administrator. Only
calls to a predefined main extension will be distributed to the phones on
the parallel ringing list. Incoming calls to other extensions will ring only
on their respective extensions.
To Next Page
Loading...
