IP PHONE FOR MX-ONE™
59 6/1553-DBC 434 01 Uen C 2010-12-17
The prerequisite is that all the involved telephones have the right service
profile.
To order remote programming of follow-me, do the following:
1. Lift the handset and wait for dial tone.
2. Dial *21*extension number to divert * extension number of the new
answering position#.
3. Wait for special dial tone.
4. Replace the handset.
7.1.6 Canceling Follow-me Remotely
To cancel remote programming of follow-me from another telephone
than the telephone with the diverted number:
1. Lift the handset and wait for dial tone.
2. Dial #21*diverted extension number#.
3. Replace the handset.
The indication of the active follow-me on the telephone with the diverted
number disappears, if there is no additional diversion remaining.
7.2 External Follow-Me
If external follow-me is allowed, you can have all calls to your extension
diverted to an external number of your choice.
When follow-me is activated, this is indicated in the display. Your phone
can still be used for outgoing calls and you will hear a special dial tone
when you lift the handset.
7.2.1 Ordering External Follow-me from Your Phone
To order external Follow-me, do the following:
1) Press Availability, select External Follow-me.
2) Enter the digit or digits to get an external line and the external
number.
External Follow-me is shown on the display. The Follow-me key
lamp is switched on.
Note: Follow-me cannot be activated by pressing the Follow-me key.
To Next Page
Loading...
