IP PHONE FOR MX-ONE™
83 6/1553-DBC 434 01 Uen C 2010-12-17
• Authorization code dialing. The calling party may use other service
profiles than those specified for the extension.
• Changing of authorization code from the phone. This enables the
user of the authorization code to change the code when suitable.
12.2.2.1 Dialing From Own Extension
To make an authorization code call from your own extension with an indi-
vidual authorization code, do the following:
1) Dial *75* authorization code #.
Wait for a verification tone.
2) Dial the desired number.
If the service profile for the dialed external number is too low for the call,
the call is rejected.
12.2.2.2 Dialing From Other Extension
To make a call from an extension with an individual authorization code
(using another phone), do the following:
1) Dial *75* authorization code * own extension number #.
Wait for a verification tone.
2) Dial the external number.
If the service profile for the dialed external number is too low for the call,
the call is rejected.
12.2.2.3 Locking an Extension
To lock an extension with an individual authorization code, do the
following:
1) Dial *76* authorization code #.
2) When you hear a verification tone and the lock icon appears in the
display, the extension is locked.
If you wish to make a call from a locked phone, different service profiles
will be used depending on whether you enter an authorization code or
not.
• If you do not enter an authorization code, the default service profile
will be used.
• If you enter a valid authorization code, the service profile associ-
ated with the authorization code will be used
To Next Page
Loading...
