Description
Dialog 4422 IP Office8
1Display
See section “Display information” on page 14.
2 Settings
Used to enter or leave setting mode. See sections “Settings” on
page 76 and “Menu structure (Settings)” on page 19. This feature
is mandatory and is programmed to this position by default.
Keys 3-8 Preprogrammed keys / Function keys / Monitoring keys
The keys are programmed with the specified default features (see
below). The features can be moved to any other programmable
function key by the system administrator.
The features can also be removed from the keys (by your system
administrator). In this case you can program frequently used
features and phone numbers on the keys.
The keys can also be used as Monitoring keys or for assigning the
features Callback, Call Pick up, Call Waiting and Intrusion.
See sections “Programming of function keys” on page 77 and “Key
Monitoring” on page 73.
3Follow-me
Indicates an activated Follow-me. Also used to deactivate Follow-
me. See section “Call Forwarding” on page 51.
4Message
Message indication key. When the key lamp is on, press the key to
retrieve the message. See section “Messages” on page 63.
5Free on 2nd
Allow a second call to be received when you already have an active
call. See section “Answer a second call during an ongoing call” on
page 31.
6Call List
Used to access the list of outgoing and incoming calls. When the
key lamp is flashing, there are unanswered incoming calls. See
sections “Redial calls from the Call List” on page 38 and “Call List”
on page 44.
7Conference
Establish a conference. See section “Conference” on page 49.
8Transfer
Transfer calls. See section “Transfer” on page 49.
To Next Page
Loading...
Need help?
General