Using the Display and Operating Elements
Aastra 630d 21
eud-1095/1.0 – I7.8 – 07.2009
■ Switching between Upper and Lower Case
You want to switch between upper and lower case while making an input in text mode.
Upper-case input is automatically activated when the first letter is entered. The text mode then
automatically switches to lower-case input. You can use the softkey to switch manually
between upper-case and lower-case input.
■ Correcting your Input
You notice you have entered a wrong digit or character. You can either delete the input one
character at a time or cancel the entire input.
■ Moving the Cursor
You want to go to a certain character for an input or correction.
With the navigation key you can move the cursor to the left or right.
a-->A
Switching between upper case and lower case in text mode:
Press the a-->A or A-->a softkey.
To delete the last character:
Press the Correction key or the Delete softkey.
Exit Editor without changes:
Press the End key.
Move the cursor with the horizontal navigation key.
eud-1095_en.book Page 21 Monday, July 13, 2009 1:56 PM
To Next Page
Loading...
Need help?
General
