Personalizing Your Phone
46 Aastra 630d
eud-1095/1.0 – I7.8 – 07.2009
■ Setting the server alarm
Depending on the system’s settings, you can receive server alarms for specific situations. These
settings are made by your system administrator in the system. Contact your system administra-
tor for more information.
When the server alarms are activated in the system, you can select from the alarm signalling as
follows: Vibracall, Progressive ring tone, Suppress ring tone.
■ Logging a cordless phone on/off
See (also) the Chapter "Managing communication systems", page 54.
■ Linking the charging contact to direct call answering
You want to choose whether to answer a call simply by lifting the phone out of its charging bay
or whether you also need to press the Call key after lifting out the phone.
You can specify that your cordless phone should behave like a fixed phone when you answer a
call. In this case you do not have to press the Call key when you lift the phone out of its charging
bay.
Press the navigation key to the right or the Menu softkey.
Settings
Scroll to Settings and press the Select softkey.
Server alarm
Scroll to Server alarm and press the Select softkey.
<Setting>
Select the setting you want and switch on or off with the Select softkey.
Press the navigation key to the right or the Menu softkey.
Settings
Scroll to Settings and press the Select softkey.
General
Scroll to General and press the Select softkey.
Direct call answer
Scroll to Direct call answer and press the Select softkey.
➔ The setting is stored.
eud-1095_en.book Page 46 Monday, July 13, 2009 1:56 PM
To Next Page
Loading...
Need help?
General
