Supplementary features
28 Aastra 630d
eud-1095/1.0 – I7.8 – 07.2009
■ Dialling with a configured softkey
You want to call a user whose phone number is stored under a softkey.
You can call the user by pressing the corresponding softkey. To find out how to configure a
softkey, refer to Chapter "Configuring Keys", page 59.
■ Dialling with a configured hotkey
You want to call a user whose call number is stored under a configurable hotkey.
You can call the user by pressing the hotkey. To find out how to configure a hotkey, refer to
Chapter "Configuring Keys", page 59.
■ Requesting a Callback
You want to talk to a certain person. The person is busy or does not answer. You can make call-
back requests to both internal and external users. Not all providers support this function.
If the called party is busy, you can activate an automatic callback. In this case, your phone will
start ringing as soon as the party you are trying to reach goes on-hook. Then when you press
the Call key, the user is called directly.
If the called party does not answer, you can also request a callback. The user then obtains a
message indicating your callback request on his display.
<Setting value>
Press the configured softkey.
➔ The key’s allocated function is shown on the display.
Press the Call key.
➔ The phone number displayed is dialled.
Press the Hotkey.
➔ The key’s allocated function is shown on the display.
Press the Call key.
➔ The phone number displayed is dialled.
You called someone and hear the busy tone or the ring-back tone.
Callback
To activate a callback request:
Press the Callback softkey.
➔ The display shows Call expected.
End
Back to the idle state:
Press the End softkey.
➔ Callback remains activated.
Note:
The callback is stored in Menu > Activated features as long as it was not
answered or cancelled by the system.
eud-1095_en.book Page 28 Monday, July 13, 2009 1:56 PM
To Next Page
Loading...
Need help?
General
