Supplementary features
Aastra 630d 29
eud-1095/1.0 – I7.8 – 07.2009
■ To answer the callback request
Someone has asked you to call back. The display shows Callback requested.
■ Call waiting with an internal user
You want to talk to an internal user. However, the person is busy.
As a result of your call waiting, the person hears a call waiting tone and your phone number or
name appears on his display. The user has the possibility of answering, deflecting or rejecting
your call.
Requirement: It is essential that the internal user has not barred the Call waiting function on his
phone (for configuration see the Chapter "Activating protection against certain types of calls",
page 55).
Ask your system administrator whether the Call waiting function is enabled on the system.
Reset
Reset callback:
Press the Reset softkey.
➔ Callback is deactivated.
Note:
You can only have 1 callback activated at a time and only 1 callback can be
expected from you. Your callback request will automatically be cancelled by
the system after about half an hour.
Call
To answer the callback request:
Press the Call softkey.
➔ The phone number is dialled.
Delete
Clear callback:
Press the Delete softkey.
➔ Callback is deleted.
Note:
As long as the callback is not answered or deleted by the system, it can be
edited using Menu > Activated features > Delete or Answer.
Call waiting
User is busy:
Press the Call waiting softkey.
➔ You hear the dialling tone.
Note:
If the user rejects the call request or if call waiting is not possible, depending on
the system configuration the call is either disconnected (busy tone) or for-
warded to a preconfigured destination.
eud-1095_en.book Page 29 Monday, July 13, 2009 1:56 PM
To Next Page
Loading...
Need help?
General
