Alarm
Aastra 630d 67
eud-1095/1.0 – I7.8 – 07.2009
Configuring the no-movement, man-down and
escape alarm
■ Configuring the no-movement, man-down and escape alarm
You want to activate/deactivate the man-down, no-movement or escape alarm.
You can activate/deactivate the man-down, no-movement or escape alarm independently of
each other and set the Detection duration and Sensitivity (see chapter "Using the no-movement,
man-down and escape alarm", page 63).
Press the navigation key to the right or the Menu softkey.
Settings
Scroll to Settings and press the Select softkey.
Sensor alarm
Scroll to Sensor alarm and press the Select softkey.
Man-down alarm
Activating/deactivating man-down alarm:
1. Scroll to Man-down alarm and press the Select softkey.
2. Scroll to Activate and press the Select softkey.
3. Scroll to Detection duration and set the duration for how long an alarm situ-
ation may occur until the pre-alarm is triggered.
➔ Alarm is activated/deactivated.
No-movement alarm
Activating/deactivating no-movement alarm:
1. Scroll to No-movement alarm and press the Select softkey.
2. Scroll to Activate and press the Select softkey.
3. Scroll to Detection duration and set the duration for how long an alarm situ-
ation may occur until the pre-alarm is triggered.
4. Scroll to Sensitivity and press the Select softkey.
5. Select the sensitivity level and press the Select softkey.
➔ Alarm is activated/deactivated.
Escape alarm
Activating/deactivating escape alarm:
1. Scroll to Escape alarm and press the Select softkey.
2. Scroll to Activate and press the Select softkey.
3. Scroll to Detection duration and set the duration for how long an alarm situ-
ation may occur until the pre-alarm is triggered.
4. Scroll to Sensitivity and press the Select softkey.
5. Select the sensitivity level and press the Select softkey.
➔ Alarm is activated/deactivated.
eud-1095_en.book Page 67 Monday, July 13, 2009 1:56 PM
To Next Page
Loading...
Need help?
General
