Personalizing Your Phone
Aastra 630d 53
eud-1095/1.0 – I7.8 – 07.2009
■ Changing the Admin PIN
You want for example to protect the alarm settings against unauthorized or unintentional
changes.
You can define and activate an Admin PIN. This means that, if the valid Admin PIN is not
entered, you can only view the alarm settings and not modify them. As long as you have not
defined the Admin PIN all alarm settings are freely accessible, without a PIN prompt.
If you have forgotten your Admin PIN, your system administrator can reset it.
<New PIN>
Enter the new PIN and confirm with the Ok softkey.
➔ The display shows Confirm user PIN.
<New PIN>
Enter the new PIN a second time and confirm with the Ok softkey.
➔ New PIN is stored.
Notes:
• For each digit entered, the display shows an "*".
• You can also change the PIN with the *47 function code (see "User’s Guide */
# Procedures").
Note:
Do not confuse the Admin PIN with the User PIN (see chapter "Changing the PIN", page 52).
Press the navigation key to the right or the Menu softkey.
Settings
Scroll to Settings and press the Select softkey.
General
Scroll to General and press the Select softkey.
Administration
Scroll to Administration and press the Select softkey.
New admin PIN
1. Scroll to New admin PIN and press the Select softkey.
2. Enter the PIN you want and confirm with the Ok softkey.
➔ The setting is stored.
Note:
Delete the current PIN if you prefer to enter your alarm settings without the
Admin PIN.
eud-1095_en.book Page 53 Monday, July 13, 2009 1:56 PM
To Next Page
Loading...
Need help?
General
