bdiRDI
JTAG interface for RDI Debuggers, BDI1000 User Manual 14
© Copyright 1999-2003 by ABATRON AG V 1.10
2.5 Installation of the Configuration Software
On the enclosed diskette you will find the BDI configuration software and the firmware required for
the BDI. Copy all these files to a directory on your hard disk.
The following files are on the diskette:
b10arm.exe Configuration program
b10arm.hlp Helpfile for the configuration program
b10arm.cnt Help contents file
b10armfw.xxx Firmware for BDI1000 for ARM targets
armjed10.xxx JEDEC file for the BDI logic device programming
bdiifc32.dll BDI Interface DLL for configuration program
bdirdi.dll RDI Interface DLL
*.bdi Configuration Examples
Example of an installation process:
• Copy the entire contents of the enclosed diskette into a directory on the hard disk.
• You may create a new shortcut to the b10arm.exe configuration program.
• The RDI interface DLL has to copied to the appropriate debugger directory
To Next Page
Loading...
