bdiRDI
JTAG interface for RDI Debuggers, BDI1000 User Manual 17
© Copyright 1999-2003 by ABATRON AG V 1.10
3 Init List
dialog box «Startup Init List»
In order to prepare the target for debugging, you can define an Initialization List. This list is stored in
the Flash memory of the BDI1000 and worked through every time the target comes out of reset. Use
it to get the target operational after a reset. The memory system is usually initialized through this list.
After processing the init list, the RAM used to download the application must be accessible.
Use on-line help (F1) and the supplied configuration examples on the distribution disk to get more
information about the init list.
To Next Page
Loading...
