ABB 261GS - Mounting with Angle Bracket (Optional)

261Gx, 261Ax | IM/261Gx/Ax-EN Rev. 08 47
9.5.5 Mounting with angle bracket (optional)
Fig. 28: Dimensions — pipe mounting/wall mounting
1) Dimensions for sensor code C, F
2) Sensor code L, D, U, 1, R, V
IMPORTANT (NOTICE)
The bracket for wall or pipe mounting has four holes with a Ø of 10.5 mm. The holes are arranged in a square and spaced
72 mm away from one another.
Change from one to two colu mns
M10688-01
35 (1.38)
2)
20
(0.79)
12,5
(0.49)
15
(0.59)
72 (2.83)
86,5 (3.4)
Ø 60 (2.36) (max. 63 (2.48))
86,5 (3.4)
72 (2.83)
46 (1.81)
1)
60 (2.36)