2600T Series Pressure transmitters | OI/266/FF/ADD-EN Rev. B 7
Idx Parameter Data Type Size Storage Description / Range / Selections / Notes
63 SPECIAL_OPERATION RW S U8 1 N
0 Do nothing
See the dedicated section
8 Reset Device Configuration to Default Configuration
9 Reset PdP Sensor Trimming to Factory Trim
12 Reset PdP Sensor Trimming to User Trim
10 Reset Static Press Sensor Trimming to Factory Trim
13 Reset Static Press Sensor Trimming to User Trim
11 Reset Sensor Temp Trimming to Factory Trim
14 Reset Sensor Temp Trimming to User Trim
1 Save current Device Configuration as Default Configuration
2 Save actual PdP Sensor Trimming as PdP Factory Trim
3 Save actual Static Press Sensor Trimming as Static Press Factory Trim
4 Save actual Sensor temp Trimming as Sensor Temp Factory Trim
5 Save actual PdP Sensor Trimming as PdP User Trim
6 Save actual Static Press Sensor Trimming as Static Press User Trim
7 Save actual Sensor temp Trimming as Sensor Temp User Trim
64 LOCAL_OPERATIONS RW S U8 1 N
0: disabled
Local operation via PUSH BUTTONS are not
allowed
1: enabled (default)
Local operation via PUSH BUTTONS are
allowed
To Next Page
Loading...
