ABB 266HSH Operating Instructions

4 OI/266/LowP-EN Rev.A | 2600T Series Pressure transmitters
1 Introduction
1 Introduction
1.1 Instruction manual structure
The present manual provides information on installing, operating,
troubleshooting the 266 pressure transmitter. Every section of
the present manual is specifically dedicated to the specific phase
of the transmitter lifecycle starting from the receipt of the
transmitter and its identification, passing to the installation, to the
electrical connections, to the configuration and to the
troubleshooting and maintenance operations.
1.2 Models covered by this manual
The present manual can be used for 266HSH Low Power
consumption pressure transmitter.
1.3 Product description
The pressure transmitters model 266 is microprocessor-based,
electronic field device. Accurate and reliable measurement of
gauge pressure is provided even in the most difficult and
hazardous industrial environments.

ABB 266HSH Specifications

General

Type	Pressure Transmitter
Material	Stainless Steel
Temperature Range	-40 to 85°C (-40 to 185°F)
Output Signal	4-20 mA
Process Connection	1/2 in. NPT
Ingress Protection	IP67
Electrical Connection	1/2 in. NPT, M20 x 1.5