Operating Instructions
Busch-AudioWorld
®
Operation
Operating Instructions | 1473-1-7955 — 13 —
4.3.6.2 Manual search mode
In step 6 "Search mode" the following functions become available:
No. Function
1 Search mode
- When confirming with the Prog button you switch to menu item "Search mode".
2 Set the radio station
The following options are available:
1. "Manual" search mode (radio station can be searched for and saved manually, a maximum of 8 stations)
- If you decide to use the "Manual" search mode, change from display "Automatic" to the manual search
mode with the "plus / minus" buttons and confirm with the Prog button.
- Search for the suitable radio frequencies with the "plus / minus" buttons.
Tip: If you keep the "plus / minus" button pressed for approximately 5 seconds, the next most powerful
station will be displayed.
- Confirm the manual selection of the station with the Prog button.
- Search for a memory location (location 1-8) with "plus / minus buttons.
- Confirm the memory location with the Prog button.
- After the confirmation with the Prog button the display shows the text "Saved". After this you change
automatically to the enquiry "Additional stations".
3 Additional stations
- Confirm your enquiry with the Prog button.
- Confirm the enquiry "Yes" with the Prog button if you wish to select additional station.
- Search for the suitable radio frequencies with the "plus / minus" buttons.
- Confirm your selection of the station with the Prog button.
- Search for a memory location (location 1-8) with the "plus / minus buttons.
- Confirm the station location with the Prog button.
_ You can keep confirming this enquiry with "Yes" until you have found and set all your desired stations,
or occupied all 8 station locations.
Attention: No message is displayed showing that all station locations are occupied, which means that
station location 8 can be continuously overwritten!
- When all 8 station locations have been occupied, change to the next processing step.
4 Quitting the input
- Answer the enquiry "Additional stations" with "No".
- Press the "plus" button.
- Confirm the enquiry "No" with the Prog button once you have set all the stations. You simultaneously
switch to the next processing step.
Pos: 39 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_126889866 8093_0.docx @ 52149 @ @ 1
To Next Page
Loading...
