ABB 8215 U-500 - Time

Operating Instructions
Busch-AudioWorld
®
Operation
Operating Instructions | 1473-1-7955 — 8 —
Pos: 25 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/3. Ebene/U - Z/Uhrzeit @ 22\mod_133155822 3312_15.docx @ 202839 @ 3 @ 1
4.3.2 Time
Pos: 26 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Bedienu ng/AudioVideo/Ei nstellungen Setup/Ei nstellungen Uhrzei t - 8215 @ 21\mod_13306835742 02_15.docx @ 199948 @ @ 1
Fig. 4: Time
If this function is not relevant for you, you can change to the next menu item by pressing the "plus or minus"
button.
In step 2 "Time" the following functions become available:
The time is only displayed on the deactivated display when the "alarm call function" is set on "active" during step
3.
No. Function
1 Time
- When confirming with the Prog button you switch to menu item "Time".
2 Setting the hours
- Set the hours with the "plus / minus" buttons.
- Confirm the hours entered by pressing PROG button.
3 Setting the minutes
- Set the minutes with the "plus / minus" buttons.
- Confirm the minutes by pressing the PROG button. You simultaneously switch to the next processing
step.
Pos: 27 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_126889866 8093_0.docx @ 52149 @ @ 1
PROG
MENU
UHRZEIT
2