ABB 8215 U-500 - Initial Setup and Adjustments

Operating Instructions
Busch-AudioWorld
®
Operation
Operating Instructions | 1473-1-7955 — 6 —
Pos: 19 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/2. Ebene/G - L/Geräteeinstellungen @ 18\mod_1302768847 744_15.docx @ 103548 @ 2 @ 1
4.3 Adjusting the device
Pos: 20 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Bedienu ng/AudioVideo/Ei nstellungen Setup/Ei nstellungen Setup - 8215 @ 21\mod_1330683395804_1 5.docx @ 199903 @ @ 1
The setup is carried out automatically during initial commissioning or when resetting the settings (RESET).
If certain functions are not relevant for you, you can change to the next menu item by pressing the "plus or minus"
button.
Carry out the device settings in the following order.
A detailed description of the individual steps is contained in the following sub-sections.
Please switch the device on.
No. Function
1 Selecting languages
2 Entering the time
3 Setting the alarm call function
We recommend that you set the alarm call function always at the same time. To set the alarm call function
after the setup is no longer possible. To activate the alarm call function you need to carry out the setup
again.
4 Selecting mono or stereo mode (type of connection)
5 Setting the illumination of the display
6 Setting the radio station
7 Quit
Pos: 21 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_126889866 8093_0.docx @ 52149 @ @ 1