ABB A135-M55 - Installing the Air Inlets; Fig. 55: Installing the Air Inlets; Table 43: Tightening Torque (72020)

Operation Manual / 4 Product description / A130-M.. - A145-M..
8 Dismantling and fitting / 8.18 Installing the air inlets
© Copyright 2020 ABB. All rights reserved. HZTL4031_EN Rev.L July 2020
8.18 Installing the air inlets
Fig.55: Installing the air inlets
Product Size Tightening torque [Nm]
A130 M12 60
A135 M12 60
A140 M12 60
A145 M12 60
Table43: Tightening torque (72020)
1. Secure lifting gear to filter silencer(81000).
2. Fit a new O-ring(81010) to the filter silencer(81000) or a new O-ring(82010) to the air
suction branch(82000).
3. Fit the filter silencer(81000) or air suction branch(82000) with the V-clamp(72020).
4. Observe the tightening torque.
Page 92 / 114