ABB Ability 800xA Series - Page 119

Appendix D Declarations by the Manufacturer
This device complies with the requirements of the EC directive 2014/30/EU,
"Electromagnetic Compatibility" (EMC directive) and meets the following requirements:
Emission:
• EN 55011
Industrial, scientific and medical (ISM) devices - radio disturbance - limits and
methods of measurement
• EN 55032
Electromagnetic compatibility of multimedia equipment (MME) and interference
emission
• EN 61000-6-4
Electromagnetic compatibility (EMC); Part 6-4: generic standard – emission for
industrial environments
• EN 61000-6-2
Electromagnetic compatibility (EMC); Part 6-2: generic standard - immunity for
industrial environments
To fulfill the EMC requirements, the other components of your installation (DC adapter,
Industrial Ethernet devices, etc.) also have to meet the EMC requirements. A shielded
cable must be used. In addition, the cable shield must be grounded properly.
RoHS
The LD 810HSE Ex device is RoHS compliant.
WEEE
2PAA114135-610 119
D Declarations by the Manufacturer