Table 2.13: Status Indicators - LEDs
For details, refer to ...DescriptionItem
... section Power Supply (PWR) LED Indicator
on page 39
Power supplyPWR
... section LED Indicators in Stand-Alone Mode
on page 40
RunningRUN
ErrorERR
... section LED Indicators in Redundant Mode
on page 41
Redundancy linkRDL
... section Status Indications of the 4 H1
Channels on page 44
H1 channel 1 to
H1 channel 4
CH1 to
CH4
The LEDs may be on permanently or flash in different colors and frequencies. We use
the following symbols:
Table 2.14: Meanings of the LED Symbols
LightingColorSymbol
OffNone
PermanentRed
PermanentGreen
FlashingRed
FlashingGreen
2PAA114135-610 38
2 Hardware Installation
2.5 Interfaces and Display Elements
To Next Page
Loading...
