3.5 Testing the IED operation
The IED has to be in the test mode before the digital outputs and certain output
signals of protection and other functions can be activated.
3.5.1 Selecting the IED test mode
The test mode can be activated by activating the IED test view. The test mode is
useful for simulated testing of functions and outputs without providing current
inputs.
1. Select IED test from the main menu structure to activate the IED test view.
Figure 4: IED test view
2. Enable parameter editing by selecting Enable Edit.
3. Select the test mode to be activated by changing the New Value field selection.
4. Select Write to device to save changes into the IED's memory.
The selected test mode is now activated.
Commissioning
1MRS758850 D
24 SSC600
Operation Manual
To Next Page
Loading...
