7 Glossary
ACT
1. Application Configuration tool in PCM600
2. Trip status in IEC 61850
CB Circuit breaker
CFG Configuration file
COMTRADE Common format for transient data exchange for power systems. Defined
by the IEEE Standard.
DAN Doubly attached node
DAT
1. Data attribute type
2. Data file
Data set The content basis for reporting and logging containing references to the
data and data attribute values
DC
1. Direct current
2. Disconnector
3. Double command
DHCP Dynamic Host Configuration Protocol
DT Definite time
EMC Electromagnetic compatibility
Ethernet A standard for connecting a family of frame-based computer networking
technologies into a LAN
GOOSE Generic Object-Oriented Substation Event
GPS Global Positioning System
HMI Human-machine interface
HTTPS Hypertext Transfer Protocol Secure
HW Hardware
IEC International Electrotechnical Commission
IEC 61850 International standard for substation communication and modeling
IEC 61850-8-1 A communication protocol based on the IEC 61850 standard series
IEC 61850-9-2 A communication protocol based on the IEC 61850 standard series
IEC 61850-9-2
LE
Lite Edition of IEC 61850-9-2 offering process bus interface
IED Intelligent electronic device
IEEE Institute of Electrical and Electronics Engineers, Inc.
IEEE 1588 v2 Standard for a Precision Clock Synchronization Protocol for networked
measurement and control systems
IP Internet Protocol
IP address A set of four numbers between 0 and 255, separated by periods. Each serv-
er connected to the Internet is assigned a unique IP address that specifies
the location for the TCP/ IP protocol.
LAN Local area network
1MRS758850 D Glossary
SSC600
Operation Manual
67
To Next Page
Loading...
