2 ACS 300 User’s Manual
Chapter 1 - Overview of This Manual
How to Use This
Manual
Safety instructions are at the beginning of this manual. In
this chapter the general instructions are stated and various
warnings and notations are described.
Chapter 1 - Introduction to This Manual,
the chapter you are
reading now, contains general information on the purpose
and contents of this manual.
Chapter 2 - Mechanical Installation,
describes the require-
ments and provides instructions for the mechanical mount-
ing of ACS 300 and the optional keypad control panel.
Chapter 3 - Power Connections,
describes the requirements
and provides instructions for connecting wiring for input
power, output power to the motor, dynamic braking compo-
nents and grounding the equipment.
Chapter 4 - Control Connections
, describes how ACS 300
can be controlled by the optional keypad control panel or by
external control signals. Instructions are provided for con-
necting the external control wiring.
Chapter 5 - Commissioning
, includes safety precautions,
start-up check list and keypad control tests.
Chapter 6 - Control and Parameter Logic
, describes how to
use the control panel.
Chapter 7 - Drive Parameters
, lists and explains the drive
parameters
.
Chapter 8 - Fault Tracing
, describes ACS 300 fault indica-
tions, fault memory and how to trace faults.
Chapter 9 - Technical Data
, lists ACS 300 technical specifi-
cations and other useful data.
Appendix A - Product Conformity in EEA
, provides informa-
tion regarding the installation of the ACS 300 in conform-
ance with the requirements of the European Economic Area.
To Next Page
Loading...
