84 ACS 300 User’s Manual
Appendix A - Product Conformity in EEA
492-10 are in conformity with the following harmonised stan-
dards:
The converter can be used in residential, commercial and
light industrial or industrial electromagnetic environments.
ACS 301 Frame Size R2
The converters with type codes ACS 301-8P7-3,
ACS 301-012-3 and ACS 301-016-3 are in conformity with
prEN 61800-3: Adjustable speed electrical power drive sys-
tems - Part 3: EMC product standard including specific test
methods 1995 approved at voting 15.03.1996 to use in first
environment class conditions marketed in the restricted dis-
tribution mode as well as in the second environment condi-
tions.
ACS 311
The Converters of Series ACS 311 (without RFI-filter) are in
conformity with the following harmonised standard
The converters are not EMC compliant as such concerning
electromagnetic emissions.
CE marking in these converters refer to Low Voltage Direc-
tive (73/23/EEC, as amended 93/68/EEC) only.
Low Voltage
Directive
Low Voltage Directive 73/23/EEC, as amended by 93/68/
EEC.
ACS 300 Frequency Converters including all types, as spec-
ified in User’s Manual, Table 1-1 and Table 1-2, are in con-
formity with the following harmonised standard:
EN 50081-1: 1992 EMC, Emission Residential, commercial and
light industry
EN 50081-2: 1993 EMC, Emission Industrial environment
EN 50081-2: 1995 EMC, Immunity Industrial environment
EN 50082-2: 1995 EMC, Immunity Industrial environment
To Next Page
Loading...
