48 ACS 300 User’s Manual
Chapter 7 - Drive Parameters
Table 7-4 Page 4 Drive parameters and their factory settings.
Detailed Parameter
Information
The remainder of this chapter is devoted to detailed expla-
nations of each parameter.
Page 1 parameters
PAGE 1 (*P2)
Press
to change to Page 2.
OUTPUT f
Frequency to motor. This parameter is display only. Jump
directly to local frequency reference setting, parameter LOC
FREQ, by pressing .
707 PI-REF(L) 0.0 - 100.0 0 70 PI-Controller Reference value
717 VERSION Display only 71 Displays program version
718 P. LOCK Open/ Locked Open 71
Code Parameter Range Default Customer Page Description
PAGE 4 (*P1) ––– 71Press to change to page 1
801 2ACC 1 0.1 - 1800 s 3 49 Parameter set 2 parameters are
similar to the parameters in pages 1
and 2.
802 2DEC 1 0.1 - 1800 s 3 49
803 2NOM RPM (0) 0 - 19999 1500 50
804 2NOM FREQ (0) 50 - 400 Hz 50 51
805 2NOM VOLT (0) 200 - 240 V or
360 - 480 V
220/480V 51
806 2COS PHI (0) 0.40 - 0.90 0.75 51
807 2CON f 1 0.0-200/500Hz 5 52
808 2CON f 2 0.0-200/500Hz 25 52
809 2CON f 3 0.0-200/500Hz 50 52
810 2I LIMIT 0.5 - 1.5 x I
N
1.5*I
N
52
811 2IR-COMP Off/0.1 – 60 V/ Auto Off 60
Code Parameter Range Default Customer Page Description
To Next Page
Loading...
