34 ACS 300 User’s Manual
Chapter 4 - Control Connections
When relay 1 is de-energized, there is continuity between
terminals X1:13 and X1:14. Relay 1 is de-energized, if the
ACS 300 is not connected to input power. When relay 1 is
energized, there is continuity between terminals X1:14 and
X1:15.
Relay 2 is similar to relay 1 and the corresponding terminals
are X1:16, X1:17 and X1:18.
The information indicated with relay outputs can be selected
by setting parameters 1. RELAY and 2. RELAY. Refer to
Chapter 7 page 64 for further information.
To Next Page
Loading...
