Chapter 8 - Checking I/O
ABB
48 (of 62) 3BHS135824 ZAB E01Rev. D ACS 6000 Commissioning Manual
8.3.4 Serial Data Communication
Connection of the ACS 6000 to a higher level automation system is
typically done via a fieldbus adapter. The signals can be tested, when
the auxiliary supply of the converter is on and the main and excitation
supply is off. Confirm with automation commissioning personnel /
customer that interface operates as intented.
Follow the checklist of the I/O signals in the commissioning report.
To Next Page
Loading...
