ABB ACS180-04S-03A7-1 - Terminal Data for the Control Cables; External EMC Filters

Note:
• The minimum specified wire size does not necessarily have sufficient current
carrying capacity at maximum load.
• The terminals do not accept a conductor that is one size larger than the
maximum specified wire size.
• The maximum number of conductors per terminal is 1.
Terminal data for the control cables
TorqueWire size
lbf·inN·mAWGmm
2
n/an/a22 - 160.5 - 1.5
External EMC filters
The table shows the external EMC filters. See also EMC compatibility and motor
cable length and EMC compliance (IEC/EN 61800-3:2004 + A1:2012) (page 140).
External EMC filter typeACS180-04...
1-phase U
n
= 208 ... 240 V
RFI-1202A4-1
RFI-1203A7-1
RFI-1204A8-1
RFI-1206A9-1
RFI-1207A8-1
RFI-13109A8-1
RFI-14112A2-1
3-phase U
n
= 208 ... 240 V
RFI-31102A4-2
RFI-31103A7-2
RFI-31104A8-2
RFI-31106A9-2
RFI-31107A8-2
RFI-31109A8-2
RFI-32115A6-2
128 Technical data